DX Autosamplers
All DX autosampler components are composed of inert, chemically resistant materials for extended lifespan. Dual X-rails and large-diameter Z-rail provide precise sampling, virtually eliminating missed samples–even on microplates.
Benefits:
- Robust dual rail system
- Dual flowing rinse station
- Precision sampling
- Reset probe - prevents probe damage
- Flexible rack configurations
2DX Brochure
4DX Brochure
8DX Brochure
14DX Brochure
Micro DX Brochure
2DX Specifications
4DX Specifications
8DX Specifications
14DX Specifications
Micro DX Specifications
Download Software
- Overview
- Configurations
- Autosampler Enclosures
- ULPA Air Filter
- Sample Racks & Vials
- Specifications
- Footprint
The 8DX is available in standard and high speed versions and is fully compatible with the FAST high speed sample introduction system. It is the smallest eight-rack autosampler on the market. It is designed for laboratories that have limited space but need to improve efficiency through higher autosampler capacity. The high-capacity 8DX increases the length of unattended runs and reduces the time associated with reloading sample racks on smaller autosamplers. It is the only eight-rack ICP/ICPMS autosampler with immediate access to all eight racks. The 8DX can be configured to hold up to 99 standard/QC.
Benefits
- Durable – Long life components for enhanced chemical resistance
- Productive – Improves speed and data quality
- Flexible Software Interface
- ~3s Speed (sample to rinse)
| Part # | Description |
| 8DX | 8DX eight rack autosampler with dual flowing rinse station |
Examples of 8DX Rack Configurations
  Eight 5x12 standard racks (480 50mL Sample Vials) |
 Optional rack configurations |
|
| Dimensions and Weight |
|
|
| Electrical Connections |
|
|
| Power Requirements |
|
|
| Environmental Conditions |
|
|
| Hardware |
|
Number of Tubes |
| Minimum PC Specification |
|
|
| Compliance with EMI, Safety Standards |
|
|
| Warranty |
|
Number of Tubes |
8 DX Autosampler with Enclosure Dimensions
8 DX Autosampler with Enclosure Dimensions
Autosampler Enclosures
ICP and ICPMS sample integrity is maintained with the ESI DX autosampler enclosures. The enclosures can be configured either as a dust cover or ULPA-filtered minienvironment.
Benefits:
- Protects samples from airborne contamination
- Exhaust acid fumes to protect the laboratory environment
- Clear acrylic construction for easy sample viewing
- Covers only the sample area—the electronics are kept outside the enclosure
- Large hinged door provides easy access to sample racks at any time
- Exhaust port (50 mm, included) connects to laboratory ventilation system
- The ULPA (Ultra-Low Particle Arrester) filter upgrade is 99.999% efficient down to 0.12 microns
| Enclosure Only | With ULPA Filter | Description |
| SC-1807-DX | SC-1807-DX-1000 | Enclosure for 8DX Autosampler |
ULPA - Ultra-Low Particulate Arrester Air Filter and Mounting Plate
The ULPA (Ultra-Low Particle Arrester) filter creates a clean, positive pressure environment for samples and standards and prevents airborne contamination. The ULPA filter removes 99.999% of 0.12 micron particles.
The ULPA filter mounting plate fits the 2DX, 4DX, Micro DX and microFAST-MC on either the right or left side of the enclosure.
| ULPA Filter Specifications | ||
| Aire Volume | Noise Level | Power |
| 1 m3/min | 56 dBA | 25W |
| Part # | Description |
| SC-0602 | ULPA Filter for ESI Enclosures |
Sample Racks
60 Position Standard Rack
LR-60-16
16mm diameter - Fits 15mL vials
(Fits: V-16-0225, PFA-T16, V-16-0200R)
Polypropylene Vial
15mL volume
Polypropylene tube with screw cap, conical (16mm OD)
V-16-0225-L - Qty 50
Content will go here.
^ top of page
© 1999-2021 Elemental Scientific. All rights reserved. | 7277 World Communications Drive | Omaha, Nebraska 68122 | Tel: +1.402.991.7800 | Fax: +1.402.991.7799
ISO 9001:2015 - Certified Quality Management System