| |
PolyPro-ST Nebulizers
The PolyPro-ST Nebulizer is a low cost HF resistant alternative to the PFA nebulizers. The PolyPro has lower chemical resistance than the PFA nebulizers but have the same high efficiency aerosol generation. A robust nebulizer that can self aspirate with an exchangeable external sample uptake capillary or used with a peristaltic pump.
- Exchangeable uptake capillaries allow one nebulizer to be used at different self-aspiration rates from 20µL/min to 700µL/min.
- Polypropylene and Teflon® construction.
- Chemically resistant to most samples including HF.
- Can be pumped from 0.1mL/min to 5.0mL/min.
- Produces a fine aerosol for high transport efficiency and high sensitivity.
- Longer lifetime than glass or quartz nebulizers.
- Capillaries available:
- 0.15 mm i.d. 20µL/min
- 0.20 mm i.d. 50µL/min
- 0.25 mm i.d. 100µL/min – recommended for peristaltic pumping 0.1 to 1.0mL/min
- 0.30 mm i.d. 200µL/min
- 0.50 mm i.d. 400µL/min—recommended for peristaltic pumping 0.5 to 3mL/min.
- 0.80 mm i.d. 700µL/min.—recommended for peristaltic pumping up to 5mL/min
Autosampler probes
Flanged autosampler probes for self aspiration at a variety of flow rates with PolyPro-ST nebulizers are also available, as well as complete kits for peristaltic pumping.
Autosamplers supported:
- ESI SC-Autosamplers
- Agilent Integrated Autosampler I-AS
- Cetac ASX-100
- Cetac ASX-500 series
- Perkin Elmer AS-9X series
- Gilson
- Spectro AS-400
- Varian SMS
|
 |
 |
| PolyPro-ST Nebulizer |
Download PDF brochure
 |
| 700µL/min capillary for a PolyPro-ST nebulizer |
 |
A flanged fitting screws on to the base of
the ST-nebulizer body to directly attach the
sample capillary or autosampler probe |
|
