| |
ACM
A Peltier cooled Nafion® micro-porous membrane for removing residual solvent vapor in the sample aerosol stream from an Apex sample inlet system. Cooling the membrane improves desolvation efficiency and long term stability.
- Nafion membrane removes water and small polar organic compounds.
- Reduces solvent derived oxide and hydride polyatomic interferences.
- Chemical resistance similar to Teflon®.
- Temperature stabilized at +3 °C, enhances long term stability.
- Can be used to analyze volatile analytes such B, Hg etc.
- Suitable for sample flow rates < 400µL/min through Apex.
- Resistant to clogging, run samples with high TDS.
- Sweep gas does not permeate through membrane, use N2 or Ar as sweep gas.
- Fast rinse out.
- Simple to operate, compared to macro-porous membrane.
- Resistant to clogging by organic compounds and salts.
- Easy to maintain and clean. Membrane is located with-in a cartridge.
- CeO+:Ce+ ratio approximately 0.05%.
 |
| Rinse out of five orders of magnitude using Elemental Scientific Apex-ACM High Sensitivity Desolvation System |
|
 |
 |
|
ACM Peltier cooled Nafion® membrane desolvation module for Apex inlet system |
Download PDF brochure
Download the Apex users manual
Download the Apex E users manual
 |
| Reduced oxide formation using ACM Membrane Desolvator with Thermo Element 2 ICPMS |
|
